Applications of Quadratic Equations in real life.

Real World Examples of Quadratic Equations

An example of a Quadratic Equation:

Quadratic equations pop up in many real world situations!
Here we have collected some examples for you, and solve each using different methods:

• Factoring Quadratics
• Completing the Square
• Graphing Quadratic Equations
• The Quadratic Formula
• Online Quadratic Equation Solver

Each example follows three general stages:

• Take the real world description and make some equations
• Solve!
• Use your common sense to interpret the results

Balls, Arrows, Missiles and Stones If you throw a ball (or shoot an arrow, fire a missile or throw a stone) it will go up into the air, slowing down as it goes, then come down again ... ... and a Quadratic Equation tells you where it will be! Example: Throwing a Ball A ball is thrown straight up, from 3 m above the ground, with a velocity of 14 m/s. When does it hit the ground?

Ignoring air resistance, we can work out its height by adding up these three things:

The height starts at 3 m:		3
It travels upwards at 14 meters per second (14 m/s):		14t
Gravity pulls it down, changing its speed by about 5 m/s per second (5 m/s2):		-5t2
(Note for the enthusiastic: the -5t2 is simplified from -(½)at2 with a=9.81 m/s2)

Add them up and the height h at any time t is: h = 3 + 14t - 5t²
And the ball will hit the ground, when the height is zero.

3 + 14t - 5t² = 0

Which is a Quadratic Equation ! In "Standard Form" it looks like:

-5t² + 14t + 3 = 0

Let us solve it ...
There are many ways to solve it, here we will use the factoring method:

It will be easier if we multiply all terms by -1:		5t2 − 14t − 3 = 0
Now our job is to factor it. We will use the "Find two numbers that multiply to give a×c, and add to give b" method in Factoring Quadratics. a×c = −15, and b = −14. The positive factors of −15 are 1, 3, 5, 15, and one of the factors has to be negative. By trying a few combinations we find that −15 and 1 work (−15×1 = −15, and −15+1 = −14)
Rewrite middle with -15 and 1:		5t2 − 15t + t − 3 = 0
Factor first two and last two:		5t(t − 3) + 1(t − 3) = 0
Common Factor is (t - 3):		(5t + 1)(t − 3) = 0
And the two solutions are:		5t + 1 = 0 or t − 3 = 0
		t = −0.2  or  t = 3

The "t = -0.2" is a negative time, impossible in our case.
The "t = 3" is the answer we want:

The ball hits the ground after 3 seconds!

Here is the graph of the Parabola h = -5t2 + 14t + 3 It shows you the height of the ball vs time Some interesting points: (0,3) When t=0 (at the start) the ball is at 3 m (-0.2,0) Says that -0.2 seconds BEFORE we threw the ball it was at ground level ... this never happened, so our common sense says to ignore it! (3,0) Says that at 3 seconds the ball is at ground level. Note also that the ball reaches nearly 13 meters high.

Note for the enthusiastic: You can find exactly where the top point is! The method is explained in Graphing Quadratic Equations, and has two steps:
Find where (along the horizontal axis) the top occurs using -b/2a:

• t = -b/2a = -(-14)/(2 × 5) = 14/10 = 1.4 seconds

Then find the height using that value (1.4)

• h = -5t² + 14t + 3 = -5(1.4)² + 14 × 1.4 + 3 = 12.8 meters

So the ball reaches the highest point of 12.8 meters after 1.4 seconds.

Example: New Sports Bike You have designed a new style of sports bicycle! Now you want to make lots of them and sell them for profit.

Your costs are going to be:

• $700,000 for manufacturing set-up costs, advertising, etc
• $110 to make each bike

Based on similar bikes, you can expect sales to follow this "Demand Curve": Unit Sales = 70,000 - 200P Where "P" is the price. For example, if you set the price: at $0, you would just give away 70,000 bikes at $350, you would not sell any bikes at all. at $300 you might sell 70,000 - 200×300 = 10,000 bikes

So ... what is the best price? And how many should you make?
Let us make some equations!
How many you sell depends on price, so use "P" for Price as the variable

• Unit Sales = 70,000 - 200P
• Sales in Dollars = Units × Price = (70,000 - 200P) × P = 70,000P - 200P²
• Costs = 700,000 + 110 x (70,000 - 200P) = 700,000 + 7,700,000 - 22,000P = 8,400,000 - 22,000P
• Profit = Sales-Costs = 70,000P - 200P² - (8,400,000 - 22,000P) = -200P² + 92,000P - 8,400,000

Profit = -200P² + 92,000P - 8,400,000

Yes, a Quadratic Equation. Let us solve this one by Completing the Square.

Solve: -200P² + 92,000P - 8,400,000 = 0

Step 1 Divide all terms by -200

P² – 460P + 42000 = 0

Step 2 Move the number term to the right side of the equation:

P² – 460P = -42000

Step 3 Complete the square on the left side of the equation and balance this by adding the same number to the right side of the equation:
(b/2)² = (-460/2)² = (-230)² = 52900

P² – 460P + 52900 = -42000 + 52900

(P – 230)² = 10900

Step 4 Take the square root on both sides of the equation:

P – 230 = ±√10900 = ±104 (to nearest whole number)

Step 5 Subtract (-230) from both sides (in other words, add 230):

P = 230 ± 104 = 126 or 334

What does that tell us? It says that the profit will be ZERO when the Price is $126 or $334
But we want to know the maximum profit, don't we?
It will be exactly half way in-between! At $230

And here is the graph: Profit = -200P2 + 92,000P - 8,400,000 The optimum sale price is $230, and you can expect: Unit Sales = 70,000 - 200 x 230 = 24,000 Sales in Dollars = $230 x 24,000 = $5,520,000 Costs = 700,000 + $110 x 24,000 = $3,340,000 Profit = $5,520,000 - $3,340,000 = $2,180,000

A very profitable venture.

Example: Small Steel Frame

Your company is going to make frames as part of a new product they are launching. The frame will be cut out of a piece of steel, and to keep the weight down, the final area should be 28 cm2 The inside of the frame has to be 11 cm by 6 cm What should the width x of the metal be?

Area of steel before cutting:

Area = (11 + 2x) × (6 + 2x) cm²

Area = 66 + 22x + 12x + 4x²

Area = 4x² + 34x + 66

Area of steel after cutting out the 11 × 6 middle:

Area = 4x² + 34x + 66 - 66

Area = 4x² + 34x

Let us solve this one graphically! Here is the graph of 4x2 + 34x : The required area of 28 is shown as a horizontal line. The area equals 28 cm2 when: x is approximately -9.3 or 0.8 The negative value of x make no sense, so the answer is: x = 0.8 cm (approx.)

Example: River Cruise

A 3 hour river cruise goes 15 km upstream and then back again. The river has a current of 2 km an hour. What is the boat's speed and how long was the upstream journey?

There are two speeds to think about: the speed the boat makes in the water, and the speed relative to the land: Let x = the boat's speed in the water (km/h) Let v = the speed relative to the land (km/h) Because the river flows downstream at 2 km/h: when going upstream, v = x-2 (its speed is reduced by 2 km/h) when going downstream, v = x+2 (its speed is increased by 2 km/h) We can turn those speeds into times using: time = distance / speed (if you travel 8 km at 4 km/h it would take 8/4 = 2 hours, right?)

Bring everything to the left and simplify: And we know the total time is 3 hours:

total time = time upstream + time downstream = 3 hours

Put all that together:

total time = 15/(x-2) + 15/(x+2) = 3 hours

Now we use our algebra skills to solve for "x".
First, get rid of the fractions by multiplying through by (x-2)(x+2):

3(x-2)(x+2) = 15(x+2) + 15(x-2)

Expand everything:

3(x²-4) = 15x+30 + 15x-30

3x² - 30x - 12 = 0

It is a Quadratic Equation! Let us solve it using the Quadratic Formula:

Where a, b and c are from the
Quadratic Equation in "Standard Form": ax² + bx + c = 0

Solve 3x² - 30x - 12 = 0

Coefficients are:		a = 3, b = -30 and c = -12
Quadratic Formula:		x = [ -b ± √(b2-4ac) ] / 2a
Put in a, b and c:		x = [ -(-30) ± √((-30)2-4×3×(-12)) ] / (2×3)
Solve:		x = [ 30 ± √(900+144) ] / 6
		x = [ 30 ± √(1044) ] / 6
		x = ( 30 ± 32.31 ) / 6
		x = -0.39 or 10.39

Answer: x = -0.39 or 10.39 (to 2 decimal places)

x =-0.39 makes no sense for this real world question, but x = 10.39 is just perfect!

Answer: Boat's Speed = 10.39 km/h (to 2 decimal places)

And hence the upstream journey = 15 / (10.39-2) = 1.79 hours = 1 hour 47min

And the downstream journey = 15 / (10.39+2) = 1.21 hours = 1 hour 13min

Example: Resistors In Parallel

Two resistors are in parallel, like in this diagram:

The total resistance has been measured at 2 Ohms, and one of the resistors is known to be 3 ohms more than the other.
What are the values of the two resistors?
The formula to work out total resistance "R_T" is:

1	=	1	+	1
RT		R1		R2

In this case, we have R_T = 2 and R₂ = R₁ + 3

1	=	1	+	1
2		R1		R1+3

Now, let us set about solving this:

Get rid of the fractions by multiplying all terms by 2R1(R1 + 3):		2R1(R1 + 3) = 2R1(R1 + 3) + 2R1(R1 + 3) 2 R1 R1+3
Simplify:		R1(R1 + 3) = 2(R1 + 3) + 2R1
Expand to:		R12 + 3R1 = 2R1 + 6 + 2R1
Bring all terms to the left:		R12 + 3R1 - 2R1 - 6 - 2R1 = 0
Simplify:		R12 - R1 - 6 = 0

Yes! A Quadratic Equation !
Let us solve it using our Quadratic Equation Solver.

• Enter 1, -1 and -6
• And you should get the answers -2 and 3

R₁ cannot be negative, so R₁ = 3 Ohms is the answer.

The two resistors are 3 ohms and 6 ohms.

Others

Quadratic Equations are useful in many other areas:

For a parabolic mirror, a reflecting telescope or a satellite dish, the shape is defined by a quadratic equation.

Quadratic equations are also needed when studying lenses and curved mirrors.
And many questions involving time, distance and speed need quadratic equations.
I am pretty sure that economists need to use quadratic equations, too!

Quadratic Equations Factoring Quadratics Completing the Square Graphing Quadratic Equations Quadratic Equation Solver Algebra Index

Search :: Index :: About :: Contact :: Contribute :: Cite This Page :: Privacy

Copyright © 2014 MathsIsFun.com

Efficient solutions to the vehicle routing problem require tools from combinatorial optimization and integer programming.

Applied mathematics is a branch of mathematics that concerns itself with mathematical methods that are typically used in science, engineering, business, and industry. Thus, "applied mathematics" is a mathematical science with specialized knowledge. The term "applied mathematics" also describes the professional specialty in which mathematicians work on practical problems; as a profession focused on practical problems, applied mathematics focuses on the formulation and study of mathematical models. In the past, practical applications have motivated the development of mathematical theories, which then became the subject of study in pure mathematics, where mathematics is developed primarily for its own sake. Thus, the activity of applied mathematics is vitally connected with research in pure mathemati